|
|
MILLER
EXPRESS: MCS 10 FUNCTION RADIO REMOTE
INSTALLATION
Step
1: Place the radio receiver in the drivers side tool box and
run the wiring cable through the opening between the tool box
and the truck cab.
Step 2: Remove the access cover to
the hydraulic valve located under the boom.
Step 3:
MATCH THE WIRE COLORS; One connection at a time, unplug the
wired remote connection from the hydraulic valve coil and
connect the MCS radio harness with the matching color
wire. Reconnect the wired remote control on the
"piggy-back" connector on the MCS wiring harness.
Step
4: Peel off the mounting adhesive cover on the back of the
receiver and press it on the wall inside the tool
box.
Step 5: Reinstall the hydraulic valve access
cover removed in step 2.
INSTALLATION TIME 20 TO 25
MINUTES
Mobile Control Systems, Inc also
manufactures a full range of aftermarket remote control
systems for the towing industry including Rollbacks,
porportional systems for Rotators and large
wreckers.
MCS-10AR Winch, Bed and underbody remote
control system
MCS will custom build a system to your
requirements.
VALVE-MATE: PRODUCTS
Click on a product below for more info!
Compressor Option
Valve-Mate II 2.4
Winch-Mate II
Proportional Radio Control
MCS-10R-ME
Radio Remote Control
Traffic Alert
System
Valve-Mate Operators
Pressure
Protection Valve
Speed
Control
Valve-Mate:Bolt-On Radio Control System for Mobile
Hydraulic Valves
|
|
|
|
